WM Clutch Nut Slim SS

Description

Product Description The Washing Machine Clutch Mechanism Lock Nut is a low-profile, high-torque replacement fastener. Because it lives at the very bottom of the wet washing tub, it is manufactured from corrosion-resistant stainless steel or galvanized alloy to withstand constant exposure to water, harsh laundry detergents, and friction. During the spin cycle, the inner tub experiences immense centrifugal force. This slim nut acts as the primary anchor point keeping the tub from wobbling, vibrating violently, or breaking loose from the drive shaft. Over time, these nuts can rust solid, suffer thread stripping during drum removal, or get damaged during routine maintenance when cleaning out lint and mold buildup beneath the tub. Key Features Standard Sizes: Most commonly available in dual-utility sizes of 36mm or 38mm outer hex diameters (with an inner thread diameter typically around 22mm or 24mm). Slim Profile: Specifically engineered with a low height to sit flush beneath the pulsator wash plate without rubbing against it. Flanged Design: Features a built-in wide base rim that acts as an integrated washer to evenly distribute clamping pressure across the base of the drum. Compatibility This is a highly standardized “universal” repair part, meaning it is not restricted to a single brand. It fits a vast range of top-loading fully-automatic washing machines, especially those utilizing an overhead nut layout to clamp down the drum. 1. Brand Compatibility LG: Widely used as an exact replacement lock nut for the LG Fuzzy Logic Series (such as the 7.0kg T6515TDCTO platform and similar capacity models). Damro / Innovex: Frequently stocked on regional marketplaces like Daraz.lk as a direct replacement component for servicing Damro top-loaders. Samsung: Fits a broad array of Samsung Wobble Technology and fully-automatic top-load washers. Toshiba & Sharp: Highly compatible with Japanese-designed top-load platforms that share the standard 36mm/38mm mechanical drive layout. 2. Maintenance Tip 🛠️ Installation Note: Because these nuts are tightly torqued down and exposed to hard water scaling, they are incredibly difficult to remove with standard wrenches. Replacing or tightening this item safely usually requires a specialized 36mm/38mm Washing Machine Clutch Spanner Wrench (a long, T-shaped or offset flat wrench) to prevent rounding off the slim edges of the nut.