Krone Bar

Description

Product DescriptionThe Krone LSA-PLUS 10-Pair Disconnection Module is an industry-standard telecommunications terminal block designed for high-density voice, data, and signal distribution. Featuring Krone’s patented Insulation Displacement Connection (IDC) technology, it allows for fast, gas-tight, and solderless wire terminations at a reliable $45^circ$ angle.Unlike standard connection modules, the disconnection variant features integrated, normally-closed internal copper contacts between the line side and the jumper side. This specialized design allows technicians to insert a test plug or disconnection peg into the center slots to temporarily interrupt the circuit, run diagnostics, or patch lines without disrupting the permanent wiring.Key SpecificationsProduct Type: 10-Pair LSA-PLUS Disconnection Module (Series 2).Termination Technology: IDC (Insulation Displacement Connection) at a $45^circ$ angle.Capacity: Accommodates up to 20 copper wire strands (10 incoming pairs and 10 outgoing pairs).Supported Wire Diameter: Solid or stranded copper wires ranging from $0.4text{mm}$ to $0.65text{mm}$ (approx. 26 AWG to 22 AWG).Housing Material: Flame-retardant, high-insulation PBT (Polybutylene Terephthalate) polymer.Contact Plating: Premium silver-plated copper alloy for exceptional conductivity and corrosion resistance.Compatibility GuideThe Krone LSA-PLUS system is a global infrastructure standard. This module is fully compatible with architectural telecommunication hardware and components from major network brands.1. Compatible Installation HardwareThis module is designed to snap directly into or onto standard telecom housing frames:Back Mount Frames: Standard stainless steel back-mount frames (such as the standard 10-way or 5-way deep brackets).LSA PROFIL Bars: Dual round stainless steel rod configurations found in high-capacity distribution frames.2. Mating Accessories & ToolsTo properly deploy and manage this module, it is explicitly compatible with:Krone LSA-PLUS Punch Down Tool: The mandatory standard sensor insertion tool used to seat and cut wires cleanly in one motion.Disconnection Pegs & Test Cords: 2-pole or 4-pole test leads, patching cords, and red disconnection pegs used to break the circuit for isolation.10-Pair Lightning Protection Magazines: Overvoltage surge protector magazines (such as the OMS-LSA/10 or standard Krone NT magazines) that plug directly into the face of the module to protect lines against lightning strikes.3. Supported Systems & EnclosuresThis module serves as the primary terminal block inside:Telecom DP Boxes: 10-pair, 20-pair, 50-pair, and 100-pair indoor/outdoor Main Distribution Frames (MDF) and Distribution Point (DP) boxes from brands like CommScope (Krone), Teapo, and generic telecom suppliers.PSTN & Intercom Lines: Perfect for analog and digital telephone systems, PABX systems, building intercom networks, and low-voltage security signaling hubs.