lugs sc35-10

Description

Item Description: SC35-10 Tinned Copper Cable LugThe SC35-10 is an industrial-grade, heavy-duty tubular ring terminal designed to create a highly secure, low-resistance electrical connection for heavy power cables.Manufactured from high-purity, seamless electrical copper, these lugs are finished with an electro-tinned layer. This tinned copper coating provides double duty: it preserves peak electrical conductivity while delivering superior protection against oxidation, rust, and galvanic corrosion—making it highly reliable for demanding automotive, marine, solar, and industrial environments.Decoding the “35-10” Specification:35: Indicates that the internal barrel shank is precision-sized for a wire cross-sectional area of $35text{ mm}^2$ (which is equivalent to 2 AWG American Wire Gauge cabling).10: Indicates that the flat ring eyelet features a hole sized specifically for an M10 screw or stud (with an opening diameter of approximately $10.5text{ mm}$ or $3/8text{ inch}$).Compatible Mechanisms & Installation ToolsBecause the SC35-10 handles large electrical current loads, it must interface with specific mechanical compression tools and heavy-duty termination points to ensure electrical safety:1. Mechanical Installation ToolsA 2 AWG ($35text{ mm}^2$) cable cannot be reliably or safely attached using standard handheld pliers. It requires dedicated compression mechanisms to ensure a “cold-weld” joint that won’t slip loose or overheat under thermal stress:Mechanical Crimp Tools: Heavy-duty, long-handled crimping pliers equipped with a rotating or interchangeable die set labeled for $35text{ mm}^2$ or 2 AWG.Hydraulic Cable Crimpers: Hand-pumped hydraulic units capable of applying multiple tons of pressure for a perfectly uniform hexagonal or point-press crimp profile.2. Compatible Wire & Cable MechanismsThe sleeve barrel is physically calibrated to slide onto and tightly clamp thick multi-strand copper conductors:Stranded Copper Power Cables: Perfectly fits $35text{ mm}^2$ / 2 AWG battery cables, heavy welding leads, secondary distribution mains, and equipment grounding straps.3. Compatible Connection Nodes (The M10 Stud)The flat ring eyelet is engineered to slide perfectly onto M10 ($10text{ mm}$ Thread Diameter or $3/8text{ inch}$) hardware assemblies, which are widely standard across various power networks:Power Inverters & Solar Charge Controllers: Connects the primary DC input or output studs of high-wattage solar or backup power systems to their battery supplies.Heavy-Duty Battery Terminals: Fits the M10 terminal posts commonly found on commercial lithium iron phosphate (LiFePO4) battery banks, marine deep-cycle setups, and heavy machinery starter batteries.Electrical Busbars & Panels: Direct fit for grounding bars, distribution bus blocks, and commercial heavy circuit fuse holders (such as ANL fuse blocks).Industrial Contactors & Relays: Fits automated switching relays, terminal blocks, and motor starter nodes in commercial plant machinery.